General Assembly - Vetus Combiflex Instructions D'installation

4 Misalignment
The maximum allowable misalign-
ment of the propeller shaft is 2˚.

5 General assembly

To achieve a reliably operating
coupling all the bolts and nuts
must be tightened with the tor-
ques given. Use a torque wrench;
tightening it 'in the blind' will not
lead to satisfying results.
The propeller shaft must be in-
serted into the hub for a sufficient
length (L) and the shaft and hub
must be free of grease and dirt (*).
6
030210.01
2° MAX.
MIN. 10 mm ( 3 / ")
8
MAX. 13 mm ( 1 / ")
2
COMBIFLEX
Flange
Coupling
LOCTITE 270 Studlock
COMBIFLEX
Coupling
L
*
LOCTITE 222 Screwlock
Tightening torque:
50 Nm (5 kg.m, 36 lbf.ft)
M10 x 25
MAX. 10 mm (
Tightening torque:
50 Nm (5 kg.m, 36 lbf.ft)
M10 SELF-LOCKING
Flange
L
*
vetus® Propeller shaft coupling 'Combiflex'
3 / ")
8