EUROM Mon Soleil 300 Manuel D'utilisation page 58

Note: Guide the electric cable and the thermostat cable (if applicable) immediately
downwards and make sure that they do not come into contact with the panel. Do
not conceal any surplus cable behind the heater!
Use and working
Control panel
1. Main switch & pilot light
2. Temperature sensor
3. Display
4. Up/down key
5. ON/OFF switch
6. button M
7. Connection external temperature sensor
External temperature sensor (7)
Display (3)
a. Temperature / Data
b. Heating symbol
c. Open-window detection symbol
d. WiFi symbol
e. Capacity indication symbol
Because the temperature
sensor is located on the heater,
does not measure the external
temperature very accurately. If you want accurate measuring,
connect the separate thermostat (included in the delivery) by
inserting the small plug into the control panel and placing the
sensor approx. 2 metres away from the heater (see
illustration). For this purpose, you should remove the heater
from the wall and subsequently, place it back. When you have
connected the separate thermostat, it automatically takes over
the thermostat operation.
58
it