VINCENT SV-129 Manuel D'utilisation page 33

CONNECTION OF A RECORDING DEVICE
At the RCA jacks "OUT REC" (11) on the back of the unit you can, if desired, connect an analogue ste-
reo recording device (e.g. CD-recorder, tape recorder, etc.) or another device that the unmodified, solid
set stereo output level (line level) is currently selected on the amplifier (9) signal source. The output level
is independent of volume control, channel balance, mute and tone controls (BASS, TREBLE, TONE).
SV129
RCA connection
redording device
REC IN
Connect this output signal via RCA cables to the signal input ("LINE IN", "TAPE IN" or "REC IN") of the
recording deviuce. It offers to the signal output of the host device to be able to use the input terminal "IN
TAPE" and to connect to the "Tape Monitor". This means the possibility of play back the recording devi-
ce while controlling output signal by pressing the button "TAPE" (8), without the output signal "OUT REC"
this will also be switched. Connect this output signal via RCA cables to the signal input ("LINE IN", "TAPE
IN" or "REC IN") of the recording deviuce. Please note that some recording equipment can have a slight-
ly disturbing influence on the respective audio signal. Some recording devices have rather low input impe-
dance, which the music signal voltage can reduce to a small extent. For maximum music enjoyment, we
recommend that you connect to the "REC" jack adapter only as long as you are recording.
Vincent
33