Mains Switch - VINCENT SV-129 Manuel D'utilisation

1 2

1. Mains switch

Turns the unit on and off, the device is switched off
from the mains. In switched on-state lights on the
LED shines.
2. Infrared receivers for remote control
3. TREBLE: Treble control
To adjust height of sound units.
4. BASS: Depth control
To adjust the bass units of the sound.
5. BALANCE
With this knob you can change the volume diffe-
rence between the two stereo channels.
FRONT VIEW
3 4 5 6 7
6. TONE: Sound system on / off
Bypass (bypass) the tone control, which were set
up at the rotary knobs BASS and TREBLE.
7. VOLUME: Volume knob
This allows the volume of the system to be increa-
sed or decreased.
8. TAPE: Tape Monitor
For the representation of the amplifier input of the
"TAPE" (10) a key on the connected device must
be pressed. The signal from this unit is not in exe-
cuted "OUT REC "(11).
9. INPUT: Knob for input selection
This allows four of the five input sources of the
amplifier to be selected, when the adjacent button
"TAPE" in is in the switch off position. In order to
select the fifth input source (TAPE) select the button
"TAPE" (8) to be operated.
8 9
Vincent
27