Installing And Charging The Battery - Konrow COOLFIVE+ Guide D'utilisation

3. Installing and charging the battery

Installing the battery:
• Remove the rear cover of your smartphone.
• Insert the battery ensuring that the image shown here is
facing you.
• Replace the rear cover of the smartphone.
CAUTION: Risk of explosion if battery is replaced by an incorrect
type. Model : CoolFive+ Li-ion Battery 4.2V DC / 2000 mAh
To replace the battery, please enquire with the after-sales
service of your dealer. Dispose of used batteries according to
the instructions.
Charging the battery:
• To charge the battery, connect the USB cable (supplied) to
the USB port of your smartphone and the other end to the
mains adaptor (supplied). Then connect the mains adaptor
to a power outlet.
• The battery charge icon illuminates during charging and
indicates the charge status.
• When the battery is fully charged, you can disconnect the
USB cable from the device then from the power outlet.
IMPORTANT:
• The smartphone is only recharged via its USB port.
• Ensure your smartphone is fully discharged before charging
it for the first time.
• The battery must be charged for at least 5 to 8 hours when
first charged.
Note: You can use the device when it is being charged. In this
case, the battery may take longer to charge fully
EN