Installing And Charging The Battery - Konrow Stone Guide D'utilisation

Inserting a MicroSD
It is possible to increase the
internal memory of the Stone
device with a MicroSD card.
(Maximum 16GB MicroSD card).
• Switch off the phone and
remove the rear cover and
battery by unscrewing the
screws and making sure the
seal of protection
water.
• Insert the memory card into
the relevant slot.
• Then replace the battery
and cover.
CAUTION: Inserting or removing
a SIM card or a MicroSD card
requires the Mobile
completely switched off.
against
to be

Installing and charging the battery

Installing the battery:
• Remove the rear cover of your Mobile.
• Insert the battery ensuring that the image shown here is
facing you.
• Replace the rear cover of the Mobile.
CAUTION: Risk of explosion if battery is replaced by an
incorrect type. Model: Stone Li-ion Battery 3.7V / 2700 mAh.
To replace the battery, please enquire with the after-sales
service of your dealer. Dispose of used batteries according to
the instructions