Installing And Charging The Battery - Konrow Flipo Guide D'utilisation

Installing and charging the battery

Installing the battery:
• Remove the rear cover of your Mobile.
• Insert the battery ensuring that the image shown here is
facing you.
• Replace the rear cover of the Mobile.
CAUTION: Risk of explosion if battery is replaced by an
incorrect type. Model: Flipo Li-ion Battery 3.7V / 800 mAh.
To replace the battery, please enquire with the after-sales
service of your dealer. Dispose of used batteries according to
the instructions
Charging the battery:
• To charge the battery, connect the USB cable (supplied)
to the USB port of your Mobile then connect the mains
adaptor to a power outlet.
• The battery charge icon illuminates during charging and
indicates the charge status.
• When the battery is fully charged, you can disconnect the
USB cable from the device then from the power outlet.
All manuals and user guides at all-guides.com
IMPORTANT:
Note: You can use the device when it is being charged. In this
case, the battery may take longer to charge fully
• The Mobile is only recharged via its USB port.
• Ensure your Mobile is fully discharged before charging it
for the first time.
• The battery must be charged for at least 5 to 8 hours when
first charged.