Titan HPE-L Notice D'instructions page 24

max. 6,0 bar
Do not exceed air pressure!
Never exceed the max. permissible air pressure of 6.0 bar.
Do not use gas or compressed air cylinders!
Do not connect the tool to a gas or compressed air cylinder.
The use of straps other than those recommended can result in
broken straps during the tightening process and insufficient
strapping.
Use only corresponding quality products from TITAN!
This device may be operated only by personnel who have been
trained accordingly. Please consult your TITAN packing
consultant if you have any questions about this.
Workplace
Always maintain an orderly workplace. A disorderly workplace can
cause accidents. When operating the crimper, make sure that you
are in a well-braced position in order to maintain optimum balance
and prevent the risk of falling.
Never operate the tool in an awkward working position!
Maintenance
In order to operate safely, the tool must be properly maintained.
Check the condition of your tool regularly for defects or worn parts.
Never use a tool that has defects or worn parts. Modifications to
the tool are strictly prohibited. Failure to comply with this regulation
can result in serious injury.
HPE
24 / 54
H 224 EU 21/06