Please note:
Operating the on / off switch (10) while brewing can damage the appliance! You may
only switch off the equipment when the appliance is in a passive state!
CAUTION: VERY HOT LIQUIDS CAN CAUSE SEVERE BURNS!
• When drawing steam or hot water, the jet (7) could spray. CAUTION: DANGER OF
SEVERE BURNS!
• Touch the steam jet (7) only on the black plastic part. Never aim at people!
• The steam jet (7) becomes VERY HOT during use. Allow it to cool off for a few minu-
tes before touching it.
2. Operational start up
2.1 Preparing the coffee machine
• Carefully remove the equipment and all the accessory parts from the packing box.
☛
Please note: If service is necessary you may return the equipment by mail in
its original packing box without reservation. Please safe the original packing
box and the packing material in a convenient place.
• Remove the water tank (11) and rinse it with cold clear tap water.
• Fill the tank to the maximum mark and place it into the coffee machine. Please
make sure that it clicks into place well when inserting.
☛
Use only clear cold water when filling the tank, and never use carbonated
water or other liquids.
• Open the cover to the bean holder (12) and fill it with coffee beans.
☛
Never use beans which have been treated with additives, such as sugar, dur-
ing or after roasting. This can damage the milling mechanism, and any such
damage is not covered under the guarantee.
• Please make sure that the steam / hot water dial (6) is set to 0.
2.2 Using your coffee machine for the first time
• Pull the power cord from the cord compartment (14) and plug it in.
• Switch on the power switch (10).
• The display shows 5 flashing bars.
• After the coffee machine has heated up, the display will show the symbol .
• Press the steam / rinsing button (5) and the system is rinsed through the coffee
outlet (8).
20
13_1383_ROT_BA_AdaVero_IH.indd 20
13_1383_ROT_BA_AdaVero_IH.indd 20
06.01.14 10:23
06.01.14 10:23