Grundfos CIM 500 Notice D'installation Et De Fonctionnement page 23

GRM IP configuration
By default, the GRM server URL and DHCP are activated on the GRM webserver.
You need a contract with Grundfos and an
external router with Internet connection to
gain access to the GRM server.
Fig. 7 Real Time Ethernet Protocol Configuration, GRM IP
Object Description
GRMIP Port Num-
A change is only needed in case Grundfos requires it.
ber
The default URL link to the GRM Server is active but hidden.
URL
A change is only needed in case Grundfos requires it.
This setting enables editing of the URL.
Check to Update
Checked: Editing of the URL is possible (not recommended).
the Settings
Unchecked: No editing of the URL is possible (default).
Default setting of
Set the URL link to GRM server to default value.
GRM server
Only needed if a manual URL was typed in and should be changed back.
address
23