Grundfos CIM 500 Notice D'installation Et De Fonctionnement page 18

Login
For administration of username and password, see also
If you experience problems with logging in
to the webserver after a firmware update,
perform a factory reset.
Fig. 2 Login
Object Description
Enter username.
Username
Default: admin.
Enter password. Default: Grundfos.
After the first log in, you are forced to change the password.
The password must contain:
• at least 8 and maximum 20 characters
• at least one lower case letter
Password
• at least one upper case letter
• at least one numeric or special character.
When logging
tially increasing time delay between each attempt. Power cycling CIM 500 resets the
back-off algorithm.
18
User
in, you have four attempts before a back-off algorithm starts an exponen-
Management.