VOLTCRAFT PL-125-T2USB Mode D'emploi page 26

Maximum / minimum function
Press the ◄ MAX MIN button (9) in the normal display mode to use the function.
• The indication MAX appears on the display.
• The real-time reading
• The maximum value of the current measurement process of T1 appears underneath
• The point in time at which the maximum value was measured is displayed at the
lower edge of the display in minutes and seconds (min:sec) or in hours and minutes
(hour:min).
• ▲T1·T2 button
Press once:
-
Press
-
once:
Press twice:
-
-
-
Press three times:
-
• The indication MIN appears on the display.
• The real-time reading of T1 appears on top.
• The minimum value of the current measurement process of T1 appears
Press
underneath.
twice:
• The point in time, at which the minimum value was measured, is displayed at lower
edge of the display in minutes and seconds (min:sec) or in hours and minutes
(hour:min).
T1 appears on top
Switch the real-time reading from T1 to T2.
Shows the maximum reading (MAX) of the current measurement process of
T2.
Shows the current difference between the readings (T1 - T2) on top.
Shows the maximum difference underneath.
Point in time, at which the maximum difference is measured, is displayed at
lower edge of the display in minutes and seconds (min:sec) or in hours and
minutes (hour:min).
Switch back to real-time and maximum reading of T1.
25