Symbol Explanation; Safety Instructions - VOLTCRAFT PL-125-T2USB Mode D'emploi

4.

SyMBoL ExPLANATIoN

An exclamation mark in a triangle indicates important instructions in this operating manual
which absolutely have to be observed.
The triangle containing a lightning symbol warns of danger of an electric shock or of the
impairment of the electrical safety of the device.
The symbol can be found when you are to be given tips and information on operation.
5.

SAfETy INSTRUCTIoNS

Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
Persons / Product
• The product is not a toy and should be kept out of reach of children!
• When used in conjunction with other devices, observe the operating instructions and
safety notices of connected devices.
• Protect the main unit from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• In schools, training facilities, hobby or self-service workshops, handling of electrical
devices must be monitored by trained personnel.
• When operating on commercial premises, the relevant accident prevention regulations
of workers' compensation boards for electrical equipment must be observed.
• Make sure there are no devices with strong electric or magnetic fields such as
transformers, motors, cordless telephones and radio-controlled devices in the vicinity
of the product as these can influence the product.
21