Intended Use; Delivery Content - VOLTCRAFT PL-125-T2USB Mode D'emploi

2.

INTENdEd USE

This product is designed for temperature measurement and is especially suitable for use in
laboratories and industrial areas. Temperature measurement is done via one or two temperature
sensor(s). Temperature can be measured with temperature sensors of type K and J. Measured values
can be frozen on the screen. The product can display the minimum, maximum and average value of a
particular measurement process. Temperature can be displayed in ºC (Celsius), ºF (Fahrenheit) or K
(Kelvin). The product features an auto-off and a backlight function. The product is capable of providing
two measurements. The product can also calculate the difference between the measured values T1
and T2 and provide the maximum, minimum and average difference of the measured values T1 and
T2. Power is supplied by three AAA batteries. Use only in a dry indoor environment.
Measurements should not be carried out under unfavourable ambient conditions. Adverse conditions
are:
• Moisture or excessive humidity
• Dust and flammable gases, vapours or solvents.
• Thunderstorms or similar conditions such as strong electrostatic fields, etc.
Unauthorised conversion and/or modification of the device are inadmissible because of safety and
approval reasons (CE). Any usage other than described above is not permitted and can damage the
product and lead to associated risks such as short-circuit, fire, electric shock, etc. Please read the
operating instructions thoroughly and keep them for further reference.
observe all safety instructions and information within this operating instructions.
3.

dELIVERy CoNTENT

• Temperature measuring instrument
• Temperature sensor (K-type) x 2
• USB cable
20
• 3 x AAA battery
• Software CD
• Operating instructions