Supplied Accessories - Sony PLS PIX1L Mode D'emploi

Preparations

Supplied Accessories

Make certain you have received the following accessories:
Paper Tray (1)
1)
Paper Holder
2)
Cleaning Cartridge (1)
Ferrite Core (1)
CD-ROM (1)
1) The paper holder is stored in the printer. Be sure to remove the paper holder from the inside of the
printer before turning the power on.
2) For information on use, refer to the operating instructions supplied with the cleaning cartridge.
3) Affix the label to the printer. You can affix up to four labels to the printer.
Notes
• When taking the unit out of the carton box, be careful not
to hurt your back.
• The packaging materials are needed when transporting
the unit, so we suggest you keep them.
Power Cord (1)
These accessories are stored in the paper holder.
Paper Core (1)
Operating Instructions (1)
Memory Card Caution Label (1)
Chapter
Adaptor (left,1)
3)
• Before transporting the unit, remove the ribbon cartridge
and paper roll from the unit.
• Before transporting the unit, also remove any paper
remnants from the paper holder. The paper remnants
may slip into the inner parts of the unit and result in
damage if not removed.
2
Adaptor (right,1)
Supplied Accessories
7