Using Split Image Print - Sony PLS PIX1L Mode D'emploi

Using Split Image Print

This function lets you print several images on a single
sheet. Splitting into prescribed-size images such as
passport photos is also possible.
This function is available in Full mode and Event mode.
1
Touch any place on the screen.
The language selection screen appears.
Memo
When using Event mode, and when only one language
was selected at the administration screen, the language
selection screen does not appear. Instead, the Main
Menu appears. In this case, proceed to step 3.
2
Touch the language you want to use.
Precautions about using the unit are shown. Read these
carefully and then touch the [OK] button.
When a Bluetooth USB adaptor is inserted and
Bluetooth communication is enabled, the device
selection screen appears. Touch [Memory Card].
3
Insert the memory card into the respective slot on the
front side of the unit.
When the memory card is recognized, the Main Menu
appears.
4
Touch [Split Image].
The split image layout selection screen appears.
5
Select the layout by touching it, and then touch the
[OK] button.
To print passport type photos, select a suitable layout.
Frames that are marked with the same letter on screen
will contain the same image.
The preview screen appears.
37
Using Split Image Print