Attaching The Paper Tray - Sony PLS PIX1L Mode D'emploi

Removing the ribbon cartridge
1
Open the side door.
2
Pull back the latch on the ribbon cartridge to release
the lock, and then grasp the ribbon cartridge and
remove it.
Memo
If the ink ribbon breaks, you can reconnect it with a
piece of tape and use the remaining ribbon.
Note
Immediately after printing, the thermal head inside the
unit will be hot. When removing a cartridge, do not
insert your hand into the ribbon cartridge access
opening, to prevent the risk of burns.
16
Installation
3
Close the side door.

Attaching the Paper Tray

Attach the supplied paper tray.