Preparing An Expansion Compactflash Card - Sony PLS PIX1L Mode D'emploi

When printing 4 × 6 inch (2PIX46) or 5 × 7 inch
sheets
About 100 sheets of printouts can be left on this paper tray.
However, the number of printouts which can be
accumulated on the paper tray changes according to the
environment condition where the printer is used or the
printed image. Remove the printed sheets accumulated on
the paper tray as soon as possible.
When printing 3.5 × 5 inch sheets
Raise the eject paper stopper.
About 100 sheets of printouts can be left on this paper tray.
However, the number of printouts which can be
accumulated on the paper tray changes according to the
environment condition where the printer is used or the
printed image. Remove the printed sheets accumulated on
the paper tray as soon as possible.
Note
Do not touch the printouts until they have been ejected
from the printer. If a printout gets stuck in the eject slot,
remove it from the slot immediately.
To remove the paper tray
Grasp the bottom of the paper tray, lift it up while keeping
it horizontal, and pull it out.
Preparing an Expansion
CompactFlash Card
For using the following functions, an expansion
CompactFlash card is required:
• Border print
• Promotional images display
• Text input
• System logs and print logs export
• Printing with Bluetooth communication
To create the expansion CompactFlash card, a
commercially available CompactFlash card is used.
The CompactFlash card can be a Type I, Type II, or
Microdrive.
We recommend using a CompactFlash card with at least
512 MB of free space.
Creating the expansion CompactFlash card
The supplied CD-ROM contains sample templates for
border prints and sample promotional images. You can
create an expansion CompactFlash card by copying this
data onto a CompactFlash card with your computer. If your
computer cannot use CompactFlash cards, you can copy
the data to another type of memory card temporarily and
then copy it to a CompactFlash card with the unit.
1
Insert the CompactFlash card into the computer.
2
Copy the promotional images.
Create the folder "\Sony\UPCR\" in the root folder of
the CompactFlash card, and copy the entire folder
"\Sony\UPCR\Promotion" into it from the supplied
CD-ROM.
3
Copy the border print templates.
The templates are stored in the folder
"\Sony\UPCR\Template" on the supplied CD-ROM.
The folder is divided into subfolders for each print size
(3×5, 4×6, and 5×7). Create the folder
"\Sony\UPCR\Template" in the root folder of the
CompactFlash card, and copy the entire folder for each
desired print size into it.
A CompactFlash card with at least 512 MB of free
space is required to copy all the data stored on the CD-
ROM.
If you have copied the CD-ROM data to a memory card
other than a CompactFlash card, you will need to use the
unit to copy it from that memory card to a CompactFlash
card.
For details on copying the data, see "Template Tab" on
page 23.
17
Installation