Eurofred GM0311E Manuel D'installation Et D'emploi page 9

d. display
the devices equipped with core needle probe have, in addition to the maintenanCe
function described in the previous paragraph, the option to cook at fixed temperature or in
delta-t mode.
S
etting the cooking in fixed temperature mode
Connect the needle probe to the device. press push-button 1 to turn on the board display.
the maintainer will show the default maintenance temperature (before switch-on), or the
last set temperature. operate the keys 2 and 3 to change the temperature.
press the key 4 to set the core cooking temperature using keys 2 and 3 to change this
temperature.
(e.g. 75°C)
press the key 6 to set the cooking chamber temperature using keys 2 and 3 to change this
temperature.
(e.g.: 90°C)
press the key 7 (start) to start cooking. the maintainer sets to preheating temperature
"pre" and emits an acoutic signal in the moment in which the ideal cooking temperature
is reached; now you can insert the product to be cooked.
if the appliance operates with this setting, after being preheated, it cooks the product at a
temperature of 90 ° C until the internal temperature reaches 75 ° C. once this temperature
is reached, the maintainer sets to "Hold" (maintenance) at 70 ° C for an indefinite period
of time.
S d
etting cooking with elta
the cooking in dt (delta-t) mode allows cooking by maintaining a constant difference in
temperature between the temperature at the core of the product and the temperature of the
cooking chamber. For best results it is recommended to start this cooking procedure with
the appliance at room temperature.
Connect the needle probe to the device. press push-button 1 to turn on the board display.
the maintainer will show the default maintenance temperature (before switch-on), or the
last set temperature. operate the keys 2 and 3 to change the temperature.
press the key 4 to set the core cooking temperature using keys 2 and 3 to change this
temperature.
(e.g. 75°C)
press the key 5 to set the dt cooking temperature using keys 2 and 3 to change this tem-
perature.
(e.g.: 25°C)
insert the product in the maintainer and press the key 7 (start) to start cooking. if the ap-
pliance operates with this setting, it will cook the product keeping a constant difference in
temperature of 25° C between the core and the cooking chamber until the internal tem-
perature reaches 75 ° C. once this temperature is reached, the maintainer sets to "Hold"
(maintenance) at 70 ° C for an indefinite period of time. (FiG. 8)
:
-t :
SyStem
ENG
(e.g.: 70°C)
(e.g.: 70°C)
9