Maintenance; Cleaning; Solenoid Valve; Door Micro Switch - Eurofred GM0311E Manuel D'installation Et D'emploi

ENG

5. maintenanCe

5.1 Cleaning

at the end of the working day, clean the appliance, both for reasons of hygiene and to
prevent operating faults.
the appliance should never be cleaned with direct water or high pressure jets.
moreover, the appliance should not be cleaned with wire sponges, ordinary steel brushes or
scrapers; eventually, you can use stainless steel wool, wiping the appliance in the direction
of sheet metal grain.
Wait for the cooking chamber to cool down.
remove the grill holder panels.
Clean the debris that can be removed manually and put the removable parts in the dish-
washer.
to clean the cooking chamber use warm soapy water. subsequently, all concerned sur-
faces must be rinsed thoroughly and make sure you have removed any detergent residue.
to clean the outer parts of the appliance, use a damp cloth and a mild detergent.
5.2 solenoid valve
the solenoid valve is the device that supplies water in the times and modes set.
5.3 door microswitch (reGenerator onlY)
the door microswitch is the device which stops the appliance when the door is opened.
once te door is closed, the regular cycle is resumed.
do not operate this appliance manually with the door open.
5.4 motor thermal breaker
the fan motor is equipped with a built-in thermal protection which stops operation in case
of overheating.
the motor restarts automatically as soon as its temperature is lowered, returning within the
safety range.
16