Eurofred GM0311E Manuel D'installation Et D'emploi page 15

20 minutes (key
5. now press the button phase
6. press the button regeneration
the core temperature at 65°C (key
7. press the button Hold
8. press enter
4.3.2 How to edit a saved program
to edit a previously saved program, press the key Book (4) to access the program
list. select the number of the desired program using keys (5) and (6).
the regenerator is automatically set to the first phase; if you want to change the second
phase, press the button phase (3).
Change the regeneration temperature by pressing the button regeneration (9) and modify
the temperature using buttons 5 and 6 to increase it or decrease it.
Change the regeneration temperature by pressing the button regeneration (10) and mod-
ify the temperature using buttons 5 and 6 to increase or decrease the value.
now press enter (1) to save the changes.
4.3.3 How to delete a saved program
to delete a previously saved program, press the key Book (4) to access the program list.
select the number of the desired program using keys (5) and (6).
press simultaneously for 10 seconds the keys Book (5) and phase (3), the program will
be deleted.
).
to switch to phase 2 programming menu.
and set the chamber temperature to 95°C and
to set the final maintenance temperature at 70°C.
to save the changes.
).
ENG
15