St2/Monitor Module - Yamaha MX400 Notice D'utilisation

8
Front and rear panels
1
PFL
2
2TR IN
MONI
3
ST2
4
ON
5
L+R
10
5
6
0
5
10
15
20
25
30
40
∞
MX400 User's Guide

ST2/MONITOR module

1
PFL indicator
This indicator (yellow) will light when the PFL switch of one or more mod-
ules is turned on.
2
2TR IN switch
This switch selects the 2TR IN input signal. This signal will be sent to the
headphone jack and to the ST2/MONI OUT jack. When this switch is on,
the 2TR IN input signal will be sent regardless of each module's PFL and
AFL switch settings.
3
MONI/ST2 switch
This switch selects the signal that is output to the ST2/MONI OUT jack.
When the switch is in the "ST2" position, the signal will be the same as the
signal that is sent to the ST1 OUT jack. When the switch is in the "MONI"
position, the signal will be taken from the PFL bus, AFL bus, or the 2TR IN
jack.
4
ON switch
This switch turns the ST2/MONITOR module on/off. When the switch is
pressed in the module is on. When the module is off, no signal will be output
from the ST2/MONI OUT jack.
5
L+R switch
This switch causes a mono mixed signal to be output from the ST2/MONI
OUT jack.
6
ST2/MONITOR fader
This fader controls the signal level of the ST2/MONITOR output.