Master Module (L-St1-R); Power Indicator - Yamaha MX400 Notice D'utilisation

POWER
PHANTOM
TALKBACK IN
GRP 1–4
AUX 1–4
ST
0 10
LEVEL
TB
0 10
8
REC OUT
0 10
0 10
TAPE IN
PHONES
9
ON
10
5
0
5
10
15
20
25
30
40
∞
L — ST 1 — R

Master module (L-ST1-R)

1

POWER indicator

1
This indicator lights when the power switch is turned on.
2
2
PHANTOM indicator
This indicator lights when the PHANTOM switch is turned on, indicating
that phantom power is being supplied.
3
3
TALKBACK IN jack
This is an unbalanced XLR type jack for connecting a talkback mic. The
nominal input level is –50dB.
4
Assign switches (GRP 1-4, AUX 1-4, ST)
These switches select the output destination (mix bus) of the talkback mic.
4
5
LEVEL control
This adjusts the signal level of the talkback mic.
5
6
TB switch
This switch controls the talkback signal. When it is pressed, the talkback sig-
6
nal will be sent to the output destination selected by the assign switch located
above.
7
Headphone jack / PHONES control
7 This is a 1/4" stereo phone jack for connecting a set of stereo headphones.
Headphones connected here can be used to monitor PFL, AFL, and the 2TR
IN signals.
8
REC OUT / TAPE IN controls
The REC OUT control adjusts the output signal level of the REC OUT jack.
The TAPE IN control adjusts the input signal level of the TAPE IN jack.
9
ON switch
This switch turns the ST1 OUT output on/off. When it is pressed in, the sig-
nal from the ST1 OUT jack will be output.
0
L-ST1-R faders
10
These faders control the level of the ST OUT output. A position at the zero
(0) marking is the nominal output level.
5
0
0
5
10
15
20
25
30
40
∞
Master module (L-ST1-R)
MX400 User's Guide
9