Multiplex ROXXY BL-Control OPTO 900 Série Notice D'utilisation page 10

Content
1. Introduction ........................................................... 10
1.1. Safety instructions ................................................. 10
1.2. Guarantee and limitation of liability .......................... 10
1.3. CE Conformity declaration ...................................... 10
1.4. Disposal Notes ....................................................... 11
2. Connections, special features ................................. 11
3. Specii cation .......................................................... 11
4. Programming the stick positions ............................. 12
1. Introduction
Brushless motor speed controller in the latest Cool Power FET Technology; thereby offering a high performance in a wide range
of applications for aircraft, boats, cars and electric heli models. The controller is particularly suitable for the ROXXY range of
Brushless motors, but will also suit other Brushless motors from other manufacturers. Please read carefully the instructions before
connecting and operating.
1.1. Safety instructions
· Take notice of the controller technical data.
· Maintain correct polarity of all connections.
· Avoid short-circuits at all costs.
· Install the controller so that it cannot come into contact with
oil, grease and water.
1.2. Guarantee and limitation of liability
MULTIPLEX Modellsport GmbH & Co.KG does not assume
any liability for loss, damage or costs which arise through
the improper use and operation of our products, or which are
connected with such operation in any way. As far as is legally
permissible, the obligation of MULTIPLEX Modellsport GmbH
& Co.KG to provide compensation for damages, on whatever
legal basis, is limited to the invoice amount of the quantity
of MULTIPLEX Modellsport GmbH & Co.KG goods that were
directly affected by whatever incident gave rise to the damage.
This does not apply if MULTIPLEX Modellsport GmbH & Co.KG
is obliged to accept unlimited liability in accordance with
mandatory law for deliberate or gross negligence.
Our products are covered by the currently valid statutory
guarantee regulations. If you wish to make a claim under
guarantee, please contact the model shop where you
purchased the product. The guarantee does not cover
malfunctions caused by the following:
1.3. CE Conformity declaration
This device has been assessed and approved in accordance with European harmonised directives. This means that you possess
a product whose design and construction fuli l the protective aims of the European Community designed to ensure the safe ope-
ration of equipment. If required, you can request MULTIPLEX Modellsport GmbH & Co.KG to supply a copy of the unit's Conformity
Declaration. Please contact the company using the contact details at the foot of the page.
10
www.modellmarkt24.ch www.modellmarkt24.ch
5. Programming the speed controller parameters
without using the Programmer ................................ 12
5.1. Characteristics, protective functions ........................ 13
5.2. Programming example ........................................... 14
6. Settings with the programmer ................................. 15
6.1. Overview of programming facilities .......................... 15
7. Programming in detail ............................................ 16
· Ensure sufi cient air circulation for cooling.
· Avoid bodily contact with all rotating parts whilst operating.
· Securely mount the motor and restrain all cables.
We reserve the right to introduce technical modii cations.
· Improper operation
· Maintenance that was performed incorrectly, late or not at
all, or performed by a non-authorized body
· Incorrect connections
· Use of non-original MULTIPLEX accessories
· Modii cations / repairs that were not carried out by MULTIPLEX
or a MULTIPLEX Service Centre
· Accidental or deliberate damage
· Faults due to normal wear and tear
· Operation outside the technical specii cations or in connection
with components from other manufacturers.
MULTIPLEX Modellsport GmbH & Co.KG
Westliche Gewerbestrasse 1 · D-75015 Bretten-Gölshausen
Multiplex/HiTEC Service: +49 (0) 7252 - 5 80 93 33