ClassicHBSling
Instructions for use - English
ClassicHighBackSling enables a comfortable and secure seated posture and gives the patient a feeling of security.
It is designed to be left in the chair after the transfer is completed, which means that the patient sits on the sling.
It provides support all the way from the hollow of the knees up over the head. ClassicHighBackSling is designed
for use in most common lifting situations such as transfers from bed to wheelchair, etc.
SystemRoMedic includes a wide range of functional, comfortable, high-quality slings that can be adapted for
different types of lifting and for patients with different needs. The choice of model and material depends on the
patient's needs and the transfer situation.
Functional inspection
Visual and mechanical inspection
Check the condition and function of the sling regularly. Always inspect the product after laundering. Check to ensure
that seams and material are free from damage. Check to ensure that fabric is not worn or faded. Apply load to the
device and check to ensure that clasps, handles, etc. withstand heavy load. If there are signs of wear, the product
must be discarded.
Always read the manual
Always read the manuals for all assistive devices used during a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
To prevent discomfort and the risk of the patient sliding out of the sling, trial fit the sling carefully. First, apply the
sling's back loops to the slingbar, and then apply the leg support loops. Use a slingbar that has been tested.
Note that there may be a risk of the patient tipping forward when a sling with standard (not separate) leg supports is used.
The lowest allowable safe working load always determines the safe working load of the assembled system.
Always check the safe working loads for the lift and accessories before use.
Contact your dealer if you have any questions.
I F U
3