Functional Inspection - DHG SystemRoMedic SlingBarWrap Manuel D'utilisation

SlingBarWrap
The SlingBarWrap is an accessory that is placed around the slingbar. It protects the patient's head in the event of impact
with the mid-section of the slingbar. The SlingBarWrap is suitable for patients who use slings that enable an upright
seated posture, or for patients who have a tendency to tilt forward.
SystemRoMedic includes a wide range of functional, comfortable, high-quality slings that can be adapted for different
types of lifting and for patients with different needs. The choice of model and material depends on the patient's needs
and the transfer situation.

Functional inspection

Visual and mechanical inspection
Check the condition and function of the sling regularly. Always inspect the product after laundering. Check to ensure that
seams and material are free from damage. Check to ensure that fabric is not worn or faded. Apply load to the device
and check to ensure that clasps, handles, etc. withstand heavy load. If there are signs of wear, the product must be
discarded.
Always read the manual
Always read the manuals for all assistive devices used during a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
To prevent discomfort and the risk of the patient sliding out of the sling, trial fit the sling carefully. First, apply the sling's
back loops to the slingbar, and then apply the leg support loops. Use a slingbar that has been tested.
Placement
3
Instructions for use - English
Place the SlingBarWrap
around the mid-section of the
slingbar. The open section
allows connection of the link
from the lift arm.
Secure the SlingBarWrap by joining the Velcro strips.
I F U