Medela Symphony Mode D'emploi page 18

8. Assembly of Pump Kit (cont.)
9
Open the lid of the breast pump.
u Press the oval button on the
top of the Symphony
the handle.
13
Center breast shields over your
nipples and start pumping.
(Caution: pushing shields too
fi rmly onto breasts may affect
milk fl ow.)
18
and lift
®
10
Position the membrane cap
fi rmly on the breast pump
membrane to form a seal.
Center the tubing connector
in the recess in the pump
housing.
u Make sure that the
membrane cap engages and
lies fl ush to the surface.
Note
If single pumping, only seat one
membrane cap.
14
To turn the pump on, press
the power button. You will
be starting in the Stimulation
Phase. After 2 minutes, the
pump will automatically change
to the Expression Phase.*