Safety Instructions - HSM Powerline 450.2 Notice D'utilisation

1 Proper use, warranty
The shredder is exclusively designed for destroy-
ing documents, as well as small quantities of store
cards, credit cards, CDs, USB sticks and 3,5"discs.
Its sturdy drive mechanism is not damaged by paper
clips and staples.
The warranty period for the document shredder is
1 year. The warranty period is 6 months when used
in multiple shifts.
This warranty and guarantee exclude wear and
damage caused by improper handling or actions
taken by third parties.
Note:
Document shredders with a 2 x 15 mm cutting unit
also come with an optional device for lubricating the
cutting unit. Note the documentation enclosed for
the oiler if your machine is equipped with one.

2 Safety instructions

Before using the machine for the fi rst
time, read the operating manual, and
keep it for later use and to pass on to
any subsequent users. Observe all
safety instructions on to the machine.
Risk of injury!
Do not reach into the paper feed slot.
Risk of injury from being pulled in!
Keep long hair, loose articles of cloth-
ing, ties, scarves, jewellery, etc. away
from feed opening. Material with the
tendency to form loops, e.g. tapes,
strapping material, etc. must not be
shredded.
Risk of injury from slivers!
Put on protective goggles before you
shred hard credit cards, CDs or fl oppy
disks.
In emergencies immediately press the
red emergency-stop pushbutton! This
switches the paper shredder off.
06/2013
Keep paper shredder out of the reach
of children. Do not let the shredder run
if the person using it is not present.
Switch the shredder off and disconnect
it from the mains if it is damaged, not
working correctly or before relocating
or cleaning it.
Service work may only be carried out
by HSM Customer Service or by the
service technicians of our contractual
partners.
• Make sure that the mains plug is well accessible.
• Before you insert the mains plug, make sure that
the voltage and frequency of your power supply
comply with the information on the name plate.
• Make sure that no liquid gets into the shredder.
• The shredder may not be placed near a heater or
other heat source.
• The ventilation slots must not be blocked or
covered and there must be at least 5 cm space
between the shredder and any wall or furniture.
3 Transportation, installation
• The transport device (e.g. hand pallet truck) must
be correspondingly rated for the machine weight
of 220 kg.
• When moving the shredder, note that it may top-
ple over.
• Place the pallet with the shredder in its packag-
ing on a smooth, level surface.
• Observe the instructions for unpacking.
• The shredder may only be placed in dry rooms
on a hard, level fl oor - not on carpets. The fl oor
load on each roller is approximately 55 kg.
Powerline 450.2
english english
9