Safety Instructions; Paper Shredder Hsm 102.2 / Primo 1200 - HSM Primo 1200 Notice D'utilisation

1 Proper use, warranty
The shredder is designed exclusively for
destroying paper. Depending on the cutting
type, it can also handle small quantities of the
following materials:
Shred width (mm)
Credit and charge cards
Its sturdy drive mechanism is not damaged by
paper clips and staples.
The warranty period for the document shredder
is 2 years. In addition, there is a 10 year guar-
antee on the solid steel blade rollers. This war-
ranty and guarantee exclude wear and damage
caused by improper handling or actions taken
by third parties.

2 Safety instructions

• Read the operating instructions before
switching on the document shredder. Save
these instructions for later use.
• Follow all warnings and instructions marked
on the product!
Risk of injury!
Do not reach into the paper feed
slot.
Risk of injury from being pulled
in!
Keep long hair, loose articles of
clothing, ties, scarves, jewellery
etc. away from feed opening.
Material with the tendency to form
loops, e.g. tapes, strapping mate-
rial, etc. must not be shredded.
Risk of combustion!
Do not use cleaning agents or
pressurized air sprays which
contain fl ammable substances, as
they could ignite.
0802
All manuals and user guides at all-guides.com
3.9 5.8
● ●
• Make sure the mains plug is easily accessi-
• Before plugging in the mains plug, check
• This paper shredder should never be placed
• The ventilation slots must not be blocked or
• Make sure no liquid is spilled on or in the paper
HSM 102.2
Primo 1200
Keep paper shredder out of the
reach of children. Do not let the
shredder run if the person using it
is not present.
Switch the shredder off and dis-
connect it from the mains if it is
damaged, not working correctly or
before relocating or cleaning it.
Service work may only be carried
out by HSM Customer Service or
by the service technicians of our
contractual partners.
ble.
that the voltage and frequency of your local
mains supply correspond to those stated on
the type plate.
near or over a radiator or heat source.
covered and they must be at a distance of at
least 5 cm away from walls or furniture.
shredder.
7