HSM Powerline 450.2 Notice D'utilisation page 11

Masquer les pouces Voir aussi pour Powerline 450.2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
5 Operation
Switching the paper shredder on
• Unlock the emergency stop button by
turning it anti-clockwise.
• Turn main switch to position I.
 Green LED lights.
 Paper shredder is ready for operation
(standby)
Notice
Safety switches are installed at the doors.
Paper shredder can only be switched on if
the door and the fl ap are both closed.
Shreds smooth paper and continuous
paper
Notice
The tray can be folded out to hold stacks
of paper or continuous lists.
Destroying USB sticks
Insert USB sticks in the centre of the paper feed.
Swit ching paper shredder off
• Turn main switch to position 0
Secure main switch with a padlock, if
necessary.
06/2013
• Feed paper. See „Techni-
cal data" for sheet capac-
ity.
 The shredding pro cess
is star ted by a pho to –cell in
the paper feeding opening.
 When the paper feed
opening is free again, the
cut ting sy stem au to ma tical-
ly swit ches off after app-
rox. 3 sec. and returns to
standby.
Powerline 450.2
english
english
Notice
The document shredder can also be
started by pressing the green arrow but-
ton:
• Press briefl y:
Cutting device starts.
Automatic stop approx. 3 seconds after
the last piece of paper was drawn in,
or manual stop when the stop button is
pressed.
• Hold down for longer than 2 seconds:
constant operation without light barrier
function.
The cutting device runs until it is
switched off with the stop button.
Only machines with cut size 3.9 x 40 mm:
Shredding crumpled paper
• Press the green arrow key.
When you push back the handle the
paper falls into the shredder blades.
Pull the drum handle
forward and put the
crumpled paper in the
drum.
11

Publicité

Table des Matières
loading

Table des Matières