Using A Smartmedia Card; Using A Sd Card/Multimediacard - Sony SnapLab UP-CR10L Mode D'emploi

Removing the CompactFlash card
When you see a message that prompts you to remove the
CompactFlash card, pull the it straight out.
Note
To prevent losing valuable data or damaging the
CompactFlash card, never remove the CompactFlash card
from the slot until the message prompts you to remove it.

Using a SmartMedia Card

Inserting the SmartMedia card
With the terminals on the SmartMedia card facing up,
completely insert the card into the slot.
When you insert the SmartMedia card into the unit, it is
automatically detected.
Removing the SmartMedia card
When you see a message that prompts you to remove the
SmartMedia card, first push the SmartMedia card until you
hear a click, then pull it out.
Note
To prevent losing valuable data or damaging the
SmartMedia card, never remove the SmartMedia card
from the slot until the message prompts you to remove it.

Using a SD Card/MultiMediaCard

Inserting the SD Card or MultiMediaCard
With the notch on the SD Card or MultiMediaCard away
from you and to the right, completely insert the card into
the slot.
When you insert the SD Card or MultiMediaCard into the
unit, it is automatically detected.
Removing the SD Card or MultiMediaCard
When you see a message that prompts you to remove the
SD Card or MultiMediaCard, first push the SD Card or
MultiMediaCard until you hear a click, then pull it out.
Notes
• To prevent losing valuable data or damaging the SD
Card or MultiMediaCard, never remove the card from
the slot until the message prompts you to remove it.
• When using a miniSD Card, always use a designated
miniSD Card adapter. There is a risk that you will not be
able to eject the miniSD Card if you insert it into the card
slot without an adapter.
31
Setting Memory Cards