Using Print Packs (Not Supplied) - Sony DPP-MS300 Mode D'emploi

Using print packs (not supplied)

Notes
• Use the set of print
paper and print
cartridge supplied
together in the same
carton. If you use them
in a different
combination, proper
printing results may
not be obtained, or a
paper jam or other
trouble may occur.
• If there are fingerprints
or dusts on the printing
surface of the Super
Coat print paper, the
printing quality may
deteriorate.
For good printing
quality, we suggest you
use the automatic
feeder VPF-A3.
About the number of
prints
Each print cartridge
allows you to print only
the same number of prints
as the number of print
paper supplied in the
print pack. If you print
with paper that has
already been printed once
or with left over paper,
the cartridge may run out
prematurely.
14 GB
Setting Up
You need an optional print pack designed for the
printer. The pack contains print paper and a print
cartridge for printing.
Select the print pack from the following according to
the type of printing you will do:
VPM-P50STA
• Designed for 50 standard prints.
• Contains one print cartridge for printing 50 sheets
and two sets of 25 sheets of standard print paper.
VPM-P50WSA
• Designed for 50 prints of full-screen stickers.
• Contains one print cartridge for printing 50 sheets
and two sets of 25 sheets of adhesive-labels.
VPM-P50S02B
• Designed for 50 prints of 2-split stickers.
• Contains one print cartridge for printing 50 sheets
and two sets of 25 sheets of 2-cut adhesive-labels.
VPM-P50S16A
• Designed for 50 prints of 16-split stickers.
• Contains one print cartridge for printing 50 sheets
and two sets of 25 sheets of 16-cut adhesive-labels.
VPM-P50LAB
• Designed for 50 Super Coat prints.
• Contains one print cartridge for printing 50 sheets
and two sets of 25 sheets of Super Coat print paper.