Administration Tab - Sony SnapLab UP-CR10L Mode D'emploi

Administration Tab

Max Prints Per Order
Sets the maximum number of prints that can be handled as
one order. Available settings are 100, 200, or 300 prints.
Also, the maximum number of prints for a single image is
99 prints.
Password
Allows you to set whether a password must be entered
before printing starts. When set to [ON], a password is
required in Full mode and Quick Print mode before
printing can begin.
Budget code
Determines whether a budget code must be input when
printing.
When this is set to [ON], the unit requests input of a budget
code before printing in Full mode and Quick Print mode.
The entered code is output in the print logs. For example,
you could assign different budget codes to different
departments, allowing you to manage actual print counts
per department. A budget code is a number up to 4 digit.
Administrator Password
Allows you to set the password for the administration
screen.
Touch the button. Using the numeric keypad that
appears, specify a password (a 4-digit number). Then
touch the [OK] button.
The administrator password can also be used as the
password that must be entered for printing to start.
26
Setting Items
Checkout Password
Allows you to set the password to be input when starting
to print.
Touch the button. Using the numeric keypad that
appears, specify a password (a 4-digit number). Then
touch the [OK] button.
Print Logs
Displays the print history of the unit, with one entry for
each order.
Each entry comprises the following items.
• Order Number
• Budget Code
• Print Size
• Print Type (P: Print, I: Index Print, S: Split Image Print,
B: Border Print, A: Print All)
• Quantity
• Price (incl. tax)
The print log information can be exported to the expansion
CompactFlash card.
To do this, touch the
exported in CSV format. The exported CSV file also
contains the budget code.
To clear the print log data, touch the
button. The print log data are
button.