Snowflake SKF20 Manuel D'exploitation page 29

TIME-CONTROLLED SOFT COOLING CYCLE
TIME-CONTROLLED HARD QUICK COOLING CYCLE
TIME-CONTROLLED QUICK FREEZING CYCLE
DEFROSTING
The defrost cycle duration is regulated by the control.
Note: The defrost cycle can be stopped at any time by pressing the
Press the time-controlled quick cooling key to select a time-controlled SOFT quick
cooling cycle.
The display shows SOFT for 3 seconds.
The clock icon and quick cooling icon fl ash.
The display shows the minimum target temperature of the cabinet interior probe during
the quick cooling.
Press the Standby key to start the cycle.
Press the time-controlled quick cooling key to select a time-controlled SOFT quick
cooling cycle.
The display shows SOFT for 3 seconds.
Press the time-controlled quick cooling key to select a time-controlled HARD quick
cooling cycle.
The display shows HARD.
The clock icon and quick cooling icon fl ash.
The display shows the minimum target temperature of the cabinet interior probe during
the quick cooling.
Press the Standby key to start the cycle.
Press the time-controlled quick freezing key to select a time-controlled quick freezing
cycle.
The clock icon and quick freezing icon fl ash.
The display shows the minimum target temperature of the cabinet interior probe during
the quick cooling.
Press the Standby key to start the cycle.
Press the DEFROST key in Standby mode to start a defrost cycle.
During this cycle, the display shows a fl ashing "DEF" while defrosting.
key.
29
ENGLISH