Snowflake SKF20 Manuel D'exploitation page 27

TIME-CONTROLLED HARD QUICK COOLING CYCLE
TIME-CONTROLLED QUICK FREEZING CYCLE
Use the Up and Down keys to change the duration of the time-controlled program.
Press the time-controlled quick cooling key to confi rm the set value.
The display now shows the storing temperature.
The quick cooling icon remains on.
The storing icon and clock icon fl ash.
Use the Up and Down keys to change the desired post-cooling cycle storing
temperature
Press the time-controlled quick cooling key to confi rm the set value.
Press the Standby key to start the cycle.
Press the time-controlled quick freezing cycle key to select a time-controlled quick freezing
cycle. The clock icon and quick freezing icon fl ash. The display shows the minimum target
temperature of the cabinet interior probe during the quick cooling.
Use the Up and Down keys to change this target value.
Press the time-controlled quick freezing key to confi rm the set value.
The display shows the cycle duration.
The quick freezing icon comes on. Clock icon remains fl ashing.
Use the Up and Down keys to change the duration of the time-controlled program.
Press the time-controlled quick freezing key to confi rm the set value.
The display now shows the storing temperature.
The quick freezing icon remains on.
The storing icon and clock icon fl ash.
Use the Up and Down keys to change the desired post-cooling cycle storing
temperature
Press the time-controlled quick freezing key to confi rm the set value.
Press the Standby key to start the cycle.
27
ENGLISH