Snowflake SKF20 Manuel D'exploitation page 24

OPERATING MANUAL
SOFT QUICK COOLING CYCLE WITH CORE TEMPERATURE PROBE
HARD QUICK COOLING CYCLE WITH CORE TEMPERATURE PROBE
Press the quick cooling cycle with core temperature probe key to select a SOFT quick
cooling cycle with core temperature probe.
The display shows SOFT for 3 seconds.
The core temperature probe icon and the quick cooling icon fl ash.
The display shows the minimum target temperature of the cabinet interior probe during
the quick cooling.
Use the Up and Down keys to change this target value.
Press the quick cooling cycle with core temperature probe key to confi rm the set value.
The display now shows the core temperature.
The quick cooling icon comes on.
The core temperature probe icon remains fl ashing.
Use the Up and Down keys to change the desired core temperature.
Press the quick cooling cycle with core temperature probe key to confi rm the set
value.
The display now shows the storing temperature.
The quick cooling icon remains on.
The storing and core temperature probe icons fl ash.
Use the Up and Down keys to change the desired post-cooling cycle storing
temperature.
Press the quick cooling cycle with core temperature probe key to confi rm the set
storing temperature value.
Press the Standby key to start the cycle.
Press the quick cooling cycle with core temperature probe key to select a SOFT quick
cooling cycle with core temperature probe.
The display shows SOFT for 3 seconds.
Press the quick cooling with core temperature probe key to select a HARD quick cooling
cycle with core temperature probe.
The display shows HARD.
The core temperature probe icon and the quick cooling icon fl ash.
The display shows the minimum target temperature of the cabinet interior probe during
quick cooling.
Use the Up and Down keys to change this target value.
Press the quick cooling cycle with core temperature probe key to confi rm the set
minimum value for the cabinet interior during the time the program is running.
The display shows the core temperature.
The quick cooling icon comes on.
The core temperature icon remains fl ashing.
24