Publicité
Les langues disponibles
Les langues disponibles
• Insert 2 AAA 1.5V batteries into the remote control.
• Point the remote control at the heating hood. Make sure there are no obstacles
between the remote control and the patio heater.
• Remove the batteries after the season that extends the life of the remote
control.
3. Control with Bluetooth and Eurom Heating app
Using the app, you can:
Remotely switch the device On and Off.
Continuously regulate the heat output from 0 to 100%.
Set a timer to switch off the device automatically.
1. Open the APP Store or Google Play on your smartphone and look for the app
called Eurom Heating.
2. Download the Eurom Heating app.
3. Make sure that Bluetooth is switched on in the settings of your smartphone.
4. Switch on the terrace heater using the On/Off button at the top of the heating
cap.
5. Briefly press once on the reset button (at the top of the heating cap) to switch
on the device.
6. Subsequently, open the Eurom Heating app on your smartphone.
7. To connect your terrace heater to the app, you should take the following steps:
Go to the button at the left-hand bottom corner of the Home screen (Fig. 1).
-
Move the bar to the right to switch on the device (Fig. 2).
-
When using the device for the first time, you will be asked to enter a
-
password. The default password is 12345678 (Fig. 3). If the password is not
accepted, you can reset the password by pressing the reset button for 5
seconds.
Now your terrace heater is connected to the app and ready to use.
-
40
Publicité
