Publicité
Les langues disponibles
Les langues disponibles
Your Sunrise patio heater can be operated in three different ways:
1. Operation with the so-called reset button on top of the heating hood. This
operating option can be seen as emergency operation for situations where the
other operating options are not possible.
2. Operation with the remote control.
3. Operation with App and Bluetooth.
1. Operation with the reset button
The reset button allows you to operate the device without the remote control. Each
time you press the reset button briefly, the power changes from: off> 100%>
66%> 33%> off etc.
2. Remote control operation
Pairing the remote control
Place the patio heater in standby mode. Plug in the socket and the on / off switch
(on top of the heating head) to on.
Press the reset button on top of the heating hood for at least 5 seconds until you
hear a signal, then immediately press any button on the remote control. Your patio
heater and the remote control are then paired.
Working with the remote control
Button
Arrow up
Max
Arrow down
On
Off
Image
Description
Switch to a higher heating
level.
Switch immediately to the
highest level.
Switch to a lower heating
level
Press ON to start the
appliance. The infrared
patio heater has a 'slow
start' at 33% output.
To switch off the patio
heater, press 'off'. The patio
heater is now on standby.
To switch off the patio
heater completely, set the
ON/OFF switch to "o" and
remove the plug from the
socket.
39
Publicité
