SOLIS 5511 Mode D'emploi page 62

SOLIS Premium Kettle E_2015 16.06.16 11:05 Seite 62
▲
BEFORE FIRST USE: RINSING THE JUG
Before first use, the jug has to be rinsed. Proceed as follows:
• Place the appliance on a dry, stable and even work surface out of the reach of
children, near a power outlet. Unwind the power cord from the appliance base
and place it in such a way that the appliance can not be yanked down by it.
• Take the jug off the appliance base.
• Open the lid of the jug by briefly pushing the lid latch inwards.
• Fill the jug with cold tap water to the MAX marking in the level indicator.
Caution: The MAX marking in the jug must never be exceeded, otherwise hot
water might squirt out! The maximum capacity is 1,5 litres. Similarly, the lowest
marking (0,2 litres) must never be fallen short of, otherwise the overheat pro-
tection is triggered.
• Place the filled jug on the appliance base and close the lid. Push the black plas-
tic surround instead of the latch button resp. the metal part to lock the lid.
• Connect the power plug to a suitable power outlet.
• Press the ON/OFF toggle switch (push dash downwards); the interior illumination
switches on during cooking.
• Wait for the water to come to a boil. The end of the cooking process is indicated
by the interior illumination going out. Additionally, the ON/OFF toggle switch
jumps back to the OFF position (point). Then, carefully pour the water out
through the spout with the lid closed.
• Repeat the process three times to remove all potential residues.
• Your appliance is now ready for use.
62