Configurations De Ventilation Approuvés; Réducteur De Débit; Restricteur D'échappement - Travis Industries 4415 HO GS2 Manuel Du Propriétaire

Table des Matières

Publicité

22
Installation
Configurations de ventilation approuvés
Réducteur de débit
Limiteurs d'admission et d'échappement sont intégrés dans l'appareil pour régler le débit d'air
d'admission et les gaz d'échappement. En fonction de la configuration d'évacuation, il peut être
nécessaire d'ajuster les positions d'étranglement. Les tableaux de ventilation configurations détail les
positions correctes des brides de ventilation acceptable.
Restricteur d'échappement
NOTE:
Certain vent configurations call for exhaust restrictor removal (position # 0). If this is the
case, remove the exhaust restrictor and replace the attachment screws in the firebox ceiling.
© Travis Industries
(pour des installateurs qualifiés seulement)
# 6
# 5
# 4
# 3
# 2
(open - stock position) # 1
4171323
Back of Firebox
Loosen these 2 screws on
the exhaust restrictor.
Slide the restrictor to the correct
restrictor position (see the illustration
below). Screw location indicates
restrictor position. In this example, the
restrictor is set in position # 4. Tighten
the screws to secure the restrictor.
100-01353-FR

Publicité

Table des Matières
loading

Table des Matières