Ec Declaration Of Conformity; Important Safety Advice - Truvox International CIMEX X46 Manuel D'utilisation

BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE
Introduction
The following instructions
information about the machine and safety advice for
the operator. Equipment must be operated, serviced
and maintained in accordance with the manufacturer's
instructions. If in doubt contact the supplier of your
machine.
Read all instructions before
using the machine
Product information
This commercial escalator cleaning machine is
designed to clean all types of escalator and travelator
treads. This machine is for indoor use only. The
machine is intended for commercial use, for example
in hotels, schools, hospitals, factories, shops, offices,
rental businesses
housekeeping purposes.
Technical Specifications
Model
Voltage AC (~)/
Frequency
Vacuum motor power
Brush diameter
Brush speed
Brush motor power
Capacity
Sound pressure level
Dimensions (L x W x H)
Weight
Cable length
Warranty
• Noise levels measured at a distance of 1 meter from
machine and 1.6 metres above floor. Measurements
recorded using a hand held meter.
• Handle vibration does not exceed 2.5 m/s², when
operating on any surface.

EC DECLARATION OF CONFORMITY

Machine Type: Floor Cleaning Machine
Model: X46...
This machine is in conformity with the following EU directives:
• Machinery Directive:
• The EMC Directive:
Applied harmonised standards:
EN60335-1, EN60335-2-67, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN62233
Truvox International Limited
Unit C (East), Hamilton Business Park,
Manaton Way, Botley Road,
Hedge End, Southampton,
SO30 2JR, UK
3
contain important
and other than normal
CIMEX X46
V/ Hz 230/50
2 x 750
cm 15
rpm 290
W 190
l 5
dB(A) 79
cm 89 x 46 x 23
kg 44
m 15
1 year
2006/42/EC
2004/108/EC
Malcolm Eneas
Operations Manager
Southampton, 24.02.2016
IMPORTANT
Waste Electrical & Electronic
Equipment (WEEE)
Do not dispose of this device with unsorted
waste. Improper disposal may be harmful
to the environment and human health.
Please refer to your local waste authority
for information on return and collection
systems in your area.

IMPORTANT SAFETY ADVICE

The safety information described in this manual
provides basic
standards in force in the country where the machine is
used.
This symbol warns the operator of hazards
and unsafe practices which could result in
severe personal injury or death.
WARNING – to reduce the risk of injury,
electric shock or fire.
1. This machine must only be used for the
manufacturer's approved application as described
in this manual.
2. The machine must be unpacked and assembled
in accordance with these instructions before
connecting to the electrical supply.
3. Operators must be fully trained in the use of the
machine in accordance with these instructions,
able to perform regular user maintenance and the
correct selection of accessories.
4. Operators should be physically capable to
manoeuvre, transport and operate the machines.
5. Operators should be able to recognise unusual
operation of the machine and report any
problems.
6. Only genuine accessories and spare parts
provided with the machine or those approved by
the manufacturer should be used.
must be performed by a qualified service agent.
7. Do not use without filters in place.
8. Do not modify the machine from its original
design.
9. Only use the machine on firm level surfaces. DO
NOT use on a gradient or more than 2% slopes.
10. DO NOT use diesel/petrol or corrosive detergents
to wash floors, even if diluted.
11. This machine is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge,
supervision or instruction concerning use of the
machine by a person responsible for their safety.
12. Keep children and unauthorised persons away
from the machine when in use. Do not use as a
toy.
13. The machine must be kept clean and in good
condition with regular inspections of the battery
charging lead and plug for signs of any damage. If
any parts are damaged they shall only be replaced
by an approved part by the manufacturer, its
service agent or a similar qualified person in order
to avoid a hazard.
precautions and
unless they have been
ELECTRICAL HAZARD
supplements
All repairs
given