Ec Declaration Of Conformity; Important Safety Advice - Truvox International Orbis ECO 200 Manuel D'utilisation

BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE
Introduction
The following instructions
information about the machine and safety advice for
the operator. Equipment must be operated, serviced
and maintained in accordance with the manufacturer's
instructions. If in doubt contact the supplier of your
machine.
Read all instructions before
using the machine
Product information
These commercial floor treatment machines are
designed for the scrubbing and polishing of hard floors
and/or shampooing of carpets in indoor areas. This
machine is for indoor use only. The machine is
intended for commercial use, for example in hotels,
schools, hospitals, factories, shops, offices, rental
businesses and other than normal housekeeping
purposes.
Technical Specifications
Model
Voltage AC (~)/ Frequency
Motor Power
Productivity rate
Pad / brush speed
Pad / brush pressure
Pad / brush diameter
Sound pressure level
Dimensions (L x W x H)
with handle
Weight
Cable length
Warranty
 Noise levels measured at a distance of 0.25 meter from machine and 1.5 metres above floor, when washing
a hard floor. Measurements recorded using a hand held meter.
 Handle vibration does not exceed 2.5 m/s², when operating on a smooth hard surface.
 Above dimensions are approx. Since the company's policy is to continuously improve the product, there could
be changes without prior notice.
Waste Electrical & Electronic
Equipment (WEEE)
Do not dispose of this device with unsorted
waste. Improper disposal may be harmful
to the environment and human health.
Please refer to your local waste authority
for information on return and collection
systems in your area.
2
IMPORTANT
contain important
Orbis ECO 200
(43cm)
OB45200/ ECO
V/ Hz 230/50
W 1100
m²/h 475
rpm 190
g/cm² 22
cm 43
dB(A) 54
cm 62 x 43 x 121
kg 26
m 15

EC DECLARATION OF CONFORMITY

Machine Type: Floor Cleaning Machine
Model: OB45200/ECO..., OB45400/ECO...,
OBLP452/400/ECO...,
This machine is in conformity with the following EU directives:
 Machinery Directive:
 The EMC Directive:
Applied harmonised standards:
EN60335-1, EN60335-2-67, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN62233
Truvox International Limited
Unit C (East), Hamilton Business Park,
Manaton Way, Botley Road,
Hedge End, Southampton,
SO30 2JR, UK
Orbis ECO 400
(43cm)
OB45400/ECO
230/50
1100
475
380
22
43
58
62 x 43 x 121
27
15
2 Years subject to conditions

IMPORTANT SAFETY ADVICE

The safety information described in this manual
provides basic precautions
standards in force in the country where the machine is
used.
This symbol warns the operator of hazards
and unsafe practices which could result in
severe personal injury or death.
WARNING – to reduce the risk of injury,
electric shock or fire.
1. This machine must only be used for the
manufacturer's approved application as described
in this manual.
2006/42/EC
2014/30/EU
Malcolm Eneas
Operations Manager
Southampton, 10/06/2016
Orbis ECO DUO
(43cm)
OBLP452/400/ECO
230/50
1100
475
Lo/Hi
27
43
60.5
62 x 43 x 121
28.5
15
and supplements
06-16