Maintenance Of Your Angelcare® Monitor; Technical Specifications - Angelcare AC401 Manuel De L'utilisateur

AC401 USA 3 langue JAN2010_AC401inter 042008 10-12-14 8:59 AM Page 13
Maintenance of your Angelcare® monitor
RETAIN INSTRUCTIONS: Keep the user's manual for future reference.
WATER, MOISTURE AND HEAT DAMAGE: Keep all components away from water (sink, bath tub, swimming pool) and places that emit heat
(stove, radiator).
VENTILATION: ALWAYS place both units on a flat surface in the upright position so that air can flow freely around them. The sensor pad is
made of plastic and does not permit the air to circulate. Therefore, mildew build up could develop underneath the mattress in the sensor pad
area. We suggest rotating the mattress regularly to prevent any mildew.
AC POWER SOURCE: Use only the AC adapters supplied with the Angelcare® monitor.
CORD PROTECTION: Avoid damage to the cords of the sensor pad and adapters. Route cords so that they are not likely to be walked on or
pinched by items placed upon or against them.
CLEANING: Disconnect all units before cleaning. DO NOT immerse in water. Use a dry cloth to keep monitor free from dust. DO NOT spray with
cleaning products or solvents. Wipe sensor pad with a cloth moistened very slightly with an antiseptic or mild detergent.
OBJECT AND LIQUID ENTRY: Care should be taken so that objects do not fall onto units and that liquids are not spilled into either unit or sensor
pad through its openings.
NON-USE PERIODS: When not using the monitor for any long period, remove the batteries from both units and disconnect the AC adapters
from electrical outlet.

TECHNICAL SPECIFICATIONS

No. of Channels: 8
Range: up to 820 ft. (250m)
Power Supply: Four AAA (LR03) alkaline batteries (not included) or 7.5V AC adapter for Nursery Unit. Four AAA (LR03) rechargeable batteries
for each Parents' Unit and 7.5V AC adapter for Charging Base for each Parents' Unit.
CAUTION:
To reduce the risk of electric shock, do not expose this product to rain or moisture.
Danger of explosion if battery is incorrectly replaced. The included batteries are 4 AAA NIMH rechargeable batteries manufactured by Sanik Battery Co.
Ltd. SN-AAA60HJ 1.2V 600mAh and by GPI International Limited, GN60AAAHC, 1.2V 600mAh. They may only be replaced by 4 AAA NIMH
rechargeable batteries.
Batteries:
- Do not mix old and new batteries
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries
Transmission:
927 MHz (USA and Canada)
Data transmission between the parents unit and nursery unit is made on the 2.4GHz frequency.
13