Fahrenheit Or Celsius Temperature Selection - GE Monogram ZEK938 Manuel Du Propriétaire

Fahrenheit
Your oven control is set to use the Fahrenheit
temperature selections, but you may change this
or Celsius
to use the Celsius selections.
temperature
1 Press the BAKE and BROIL HIGH/LOW pads
selection
2 Press the BROIL HIGH/LOW and COOK TIME
3 Press the START pad. The new setting will be
NOTE: On double oven models, the new setting
will be displayed for both ovens.
Auto
When using convection bake, the Auto Recipe
Conversion feature will automatically convert
Recipe
™
entered regular baking temperatures to
conversion
convection baking temperatures.
Once the feature is activated, the display will show
the actual converted (reduced) temperature. For
example, if you enter a regular recipe temperature
of 350°F and press the START pad, the display will
show "CON" and the converted temperature of
"325°F."
NOTE: This feature does not convert convection
bake cooking times, only regular baking
temperatures.
To Activate the Feature:
1 Press the BAKE and BROIL HIGH/LOW pads
2 Press the CONV BAKE/1 RACK pad. The display
3 Press the START pad.
To deactivate the feature, repeat steps 1–3 above
but press the START pad when "CON OFF" is in
the display.
(on double oven models, use the upper oven
controls) at the same time for 3 seconds until
the display shows "SF."
pads at the same time. The display will show
"F" (Fahrenheit).
Press the BROIL HIGH/LOW and COOK TIME
pads again at the same time. This will show "C"
(Celsius).
displayed for both ovens.
(on double oven models, use the upper oven
controls) at the same time for 3 seconds, until
the display shows "SF."
will show "CON OFF." Press the CONV BAKE/1
RACK pad again. The display will show "CON ON."
™
31