Identifying The Product; Understanding The Machine; General Information; Contents Of Shipment, Specifications, And User Controls - Hürner HWT 400–WeldControl Manuel Utilisateur

persons who are needed and instructed may remain close to
the machine, and appropriate lifting tools have to be used.
2.9

Identifying the Product

Every product is identified by a name plate. It shows the model ("Typ"),
the serial number ("Geräte-Nr."), and the manufacturer. The first two
digits of the serial number represent the year of manufacture.
3

Understanding the Machine

3.1

General Information

This butt-welding machine for plastics can be used only indoors as a
workshop installation, for jointing straight pipe to straight pipe or
segmented bends, but also for making tees, Y branch-offs, and cross-
pieces (see also Sect. 3.4 and 5.1, 5.2 for more detailed information).
The machine enables welding according to two modes, the Manual
Mode and the Data Logging/Report Generation mode, or Weld Control
Mode for short.
For your convenience, the machine can be specifically costumized and
tailored to a user's needs in its Configuration Menu (see Sect. 4.4).
3.2 Contents of Shipment, Specifications, and User Controls
The explications below are meant to contribute to a clear under-
standing of the designations used in this manual for referring to the
machine parts.

3.2.1 Included Components

• Workshop butt-welding machine up to O.D. 400 mm, including
LH/RH master pipe clamp assemblies O.D. 90 - 400 mm
• Assembly with movable electrical heating element with anti-stick
coating and electrical facing tool
• Automation control unit with input/control arrow keys
Optionally available
• Tag printer
• Clamp assemblies for tees, crosspieces, and Y branch-offs
• Welding neck support
• Clamps for molded fittings and welding neck
• Additional cylinder

3.2.2 Component Overview

(see facing page)
8
EN
HÜRNER HWT 400–WeldControl User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Workshop Welding Machine HWT 400–W
Ser. No. 20405004 || | | | | | || | | | | | ||||| | | | | | | |||| |
Range 90 - 400 mm Weight 567 kg
Supply 400 V AC3 Ph + PE 50 Hz 9 kW
Year: 2020
HÜRNER Schweisstechnik GmbH
Nieder-Ohmener Str. 26
D - 32325 Mücke
+49 6401 9127 -0
Version January 2020