Destined Use; Regulations For The Prevention Of Accidents; Safety Instructions - Pfaff ALPHA Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Wall mounted winch >ALPHA<
English
Before taking into operation, please carefully read this operating instruction!
Observe the safety instructions!
File documentation!

Destined use

The Wall mounted winch ALPHA is a manually operated winch, fixed to the wall for lifting and lowering of
loads.
The winch is not suitable for use in explosive danger area.
The winch is not suitable for use in corrosive atmosphere.
Power operation is not allowed.
The winch is not designed for continuous operation respective for stress due to vibration.
The wire rope winch is not suitable for major transformations of energy during lowering operation.
Alterations to the winch or fitting of accessories are only allowed with our written approval.
Pay attention to the technical data and functional description!

Regulations for the Prevention of Accidents

Observe any rules that are valid for the respective country.
Presently valid in Germany:
EC Directive 2006/42/EC
BGV D 8 Winches- lifting and pulling devices
BGR 500-2.8 Load suspension devices in hoist operation
DIN EN 13157 (09.04) Safety – Hand powered lifting equipment
DIN 15020 page 1 and page 2
FEM 9.661 ISO 4308/1
1)
in the respective version

Safety Instructions

Operation, installation, and maintenance work should be executed only by personnel who are:
Competent and qualified:
Qualified persons for reasons of their training, experience and instruction are persons who do their necessary activities without danger and
who can avoid this danger due to their knowledge of directives, regulations for the prevention of accidents and standards. These persons are
responsible for the security of the installation.
Do not grease or lubricate the brake mechanism.
Moving of people by the winch or of loads over people is strictly forbidden.
The braking device is located in the crank.
It is forbidden to remote the safety spring crank, or the safety crank, safety-catch pawl and
torque reaction arm.
Never touch moving parts.
Competent trained personnel must repair defects immediately.
The load
must not be left suspended without supervision,
must not be allowed to swing
must not fall into the wire rope
The Winch
Do not exceed the capacity of each rope layer.
Before taking into operation, a competent person must check:
the lifting device
the load bearing parts of the structure
the carrying medium
mounting
technische Änderungen vorbehalten
(Definition of experts acc. to IEC 364)
design changes under reserve
04.04.013
1)
changements techniques sous réserve
8

Publicité

Table des Matières
loading

Table des Matières