en
Declaration of conformity
Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the product Mirka® LEROS 225 mm (9") 8,000 rpm Electrical Random
Orbital Sander (see "Technical data" table for particular model) to which this declaration relates is in conformity
with the following standards or other normative documents: EN 62841-1:2014, EN 62841-2-4:2014, EN 55014-1,
EN 55014-2, EN 61000-3-2:2014, EN 61000-3-3:2013, in accordance with regulations 2006/42/EC, 2014/30/EU,
2011/65/EU
Jeppo 31.03.2017
Place and date of issue
Operating instructions include:
Exploded view, Parts list, Declaration of
conformity, Important, Warning, Caution,
Additional safety warnings, Technical data
table, Noise and vibration information,
Proper use of tool, Work stations, How to get
started, Operating instructions, Maintenance,
Replacing the backing pad, Replacing the
backing pad and interface, Replacing the
brake seal, Further service, Troubleshooting
guide, Disposal information
Original instructions We reserve the right to make changes to this manual without prior notice
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool Keep these
instructions in a safe and accessible location
Required personal safety equipment
Read
operator's manual
Warning: Potentially hazardous situation that may result in death or serious injury and/or property damage
Caution: Potentially hazardous situation that may result in minor or moderate injury and/or property
damage
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from:
Superintendent of Documents; Government Printing Office; Washington DC 20402
• State and local regulations
42
Mirka® LEROS Random Orbital Sander • 225 mm (9")
Company
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel +358 20 760 2111
Fax +358 20 760 2290
www mirka com
Wear
safety glasses
ear protection
Stefan Sjöberg, CEO
Wear
safety gloves
Wear
face mask
Wear