Declaration Of Conformity; Important - MIRKA DEROS 325CV Instructions D'utilisation

en

Declaration of conformity

Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the products Mirka® DEROS 77 mm (3"), 125 mm (5") & 150 mm (6")
10,000 rpm Electrical Random Orbital Sander (See "Technical data" table for particular model) to which this
declaration relates are in conformity with the following standards or other normative documents: EN 62841-1:2015,
62841-2-4:2014, EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-2:2015, EN 61000-3-2:2014, 6100-3-3:2013,
EN 300 328 V1 9 1, EN 301 489-1 V2 1 1, EN 301 489-17 V3 1 1 in accordance with the regulations 2006/42/EC,
2011/65/EU, 2014/53/EU
Jeppo 13.02.2019
Place and date of issue
Operating instructions include:
Exploded view, Parts list, Declaration of
conformity, Important, Warning, Caution,
Additional safety warnings, Technical data
table, Noise and vibration information,
Proper use of tool, Work stations, How to get
started, Operating instructions, Bluetooth,
Maintenance, Replacing the backing pad,
Pad saver, Replacing the brake seal, Further
service, Troubleshooting guide, Disposal
information, Reducing vibrations when
sanding with pad saver or interface
Original instructions We reserve the right to make changes to this manual without prior notice

Important

Read these safety and operating instructions carefully before installing, operating or maintaining this tool Keep these
instructions in a safe and accessible place
Required personal safety equipment
Read
operator's manual
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from: Superintendent of Documents;
Government Printing Office; Washington DC 20402
• State and local regulations
52
Mirka® DEROS • 77 mm (3"), 125 mm (5") & 150 mm (6") • 230 V
Company
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel +358 20 760 2111
Fax +358 20 760 2290
www mirka com
Wear
safety glasses ear protection
Stefan Sjöberg, CEO
Wear
safety gloves
Wear
face mask
Wear