Declaration Of Conformity; Important - MIRKA DEROS 550X CV Mode D'emploi

en

Declaration of conformity

KWH Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the products Mirka® DEROS X 150 mm (6 in . ) and 125 mm (5 in . ) 10,000 rpm
Electrical Random Orbital Sander (see "Technical data" table for particular model) to which this declaration relates
are in conformity with the following standard(s) or other normative document(s) EN ISO: EN 60745, EN 55014-1,
EN 55014-2 in accordance with reglulations 2006/42/EC, 2014/30/EU, 2011/65/EU .
Jeppo 31.01.2017
Place and date of issue
Operating instructions include:
Exploded view, Parts list, Declaration of
conformity, Important, Warning, Caution,
Additional safety warnings, Compliance,
Technical data, Noise and vibration
information, Proper use of tool, Work stations,
How to get started, Operating instructions,
Bluetooth, Maintenance, Replacing the
backing pad, Pad saver, Replacing the brake
seal, Further service, Troubleshooting guide,
Disposal information, Reducing vibrations
when sanding with pad saver or interface .
We reserve the right to make changes to this manual without prior notice .

Important

Read these safety and operating instructions carefully before installing, operating or maintaining this tool . Keep these
instructions in a safe and accessible location .
Required personal safety equipment
Read
operator's manual
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage .
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage .
CM
C US
Intertek
4006707
8
Mirka® DEROS • 125 mm (5") & 150 mm (6") • 110 V
Wear
safety glasses
CONFORMS TO UL STD
60745-1, 60745-2-4
CERTIFIED TO CAN/CSA STD
C22.2 No. 60745-1, C22.2 No. 60745-2-4
Company
Manufacturer / Supplier
KWH Mirka Ltd
66850 Jeppo, Finland
Tel . +358 20 760 2111
Fax +358 20 760 2290
www .mirka .com
Wear
ear protection
Stefan Sjöberg, CEO
Wear
safety gloves
Wear
face mask