INFORMATION TO THE USERS
its life cycle to the suitable separate waste collection centres of electronic and
electro-technical wastes, or to give it back to the seller or dealer when buying a
new equipment of equivalent type, in terms of one to one.
The suitable separate waste collection for the following sending of the disused
equipment to recycling, the dealing or handling and compatible environment
disposal contributes to avoid possible negative effects on the environment and
on the people's health and helps the recycling of the materials the machine is
composed of. The user's illegal disposal of the product implies the application
of administrative fines as stated in Law Decree n.22/1997" (article 50 and follow-
ings of the Law Decree n.22/1997).
PREPARATION BY THE PURCHASER
•
Preparation of the installation site.
The purchaser must prepare the surface on which the machine will stand suit-
able to support the machine weight (see the installation chapter).
•
Electrical requirements.
The mains power installation must comply with the safely regulations and
standards in force in the country of installation and must include an efficient
earth system. An omnipolar cut-off device must be installed on the power line
upstream of the machine.
14
•
Should you decide to stop using this type of unit,
we suggest you render it inoperable by unplug-
ging it and cutting the power supply cord.
•
Never dispose of the machine in the environ-
ment: to dispose of the machine, contact an au-
thorized center or contact the manufacturer for
pertinent indications.
Under the senses of the Directives/ Guidelines
2011/65/EU concerning the reduction of the use
of dangerous substances in electric and electronic
equipment, as well as the disposal of wastes".
The symbol of the crossed large rubbish container
that is present on the machine points out that the
product at the end of its life cycle must be collected
separately from the other wastes. The user for this
reason will have to give the equipment that got to
APPIA LIFE